|
|
DT Receiver - Rx43d Details
|
|
|
|
|
DESCRIPTION:
- For Planes: 3 Actuators + 2 brushed ESC's + 4 servos
- For Helis: 1 reversable motor (tail up/down) + 2 contra-rotating motors
| Actuator outputs: | 3, 11ohm, 128 step |
| Optional output: | Actuator outputs 1 & 2 can drive a 2-direction (reversable) 0.4A motors |
| Optional output: | Actuator output 3 can drive a 2-direction (reversable) 0.8A motor |
| Servo outputs: | 4, 1024 step |
| Optional output: | 7ch Sum-PPM or Serial output on 1 pin |
| Brushed ESC's: | 2, 2A, 64 step, 1-direction (planes), optional 'twin-steer' mix |
| Size: | 11.8 x 12.9 x 2.2mm |
| Weight: | 0.34g |
| Pad spacing: | 1.27mm (0.05") |
| Voltage: | 3-6v |
| Modulation: | 2.4GHz compatible with 22ms DSM2 Air and 16.5ms DSM2 Surface |
| Range: | Indoor |