|
|
Rx61 Overview - v603
|
|
|
|
|
|
|
|
PRODUCT: Rx61
VERSION: 603
PCB ID: 61b (printed)
PCB MARK: 03 (hand written)
THIS VERSION IS: Rx61b - v603
OLDER VERSION: Rx61a - v602
NEWER VERSION: Rx61b - v610
NEWER VERSION: Rx61c - v611
DESCRIPTION:
Receiver for surface vehices.
All variants are physically identical and have the same software but different defaults.
All outputs can be changed individually by operator.
| Variant |
Rx61-1 | Rx61-2 | Rx61-22 | Rx61-3 | Rx61-4 | Rx61-5 | Details |
|
Purpose: |
Train with joystick Tx |
Train with Tx21 |
Train with Tx22 |
Car with joystick Tx |
Conven- tional |
Car with Dx3 |
|
|
'H' output: (H-Bridge) |
1 |
1 |
1 |
1 |
1 |
1 |
Integrated forward/reverse ESC for brushed motors 512 step PWM control |
|
Motor control |
'Low off' |
'Center off' |
'Center off' |
'Center off' |
'Center off' |
'Center off' |
|
|
Direction channel |
Yes |
- |
- |
- |
- |
- |
|
|
'P' outputs: (Pads) |
8 |
8 |
8 |
8 |
8 |
8 |
Signal pads for Servos and low current on/off switching (<20mA) Special programs for car lights and other switching 1024 step Servos Serial data feed |
|
Servos |
1 | 1 | 1 | 1 | 8 | 3 | |
|
On/off switching |
7 | 7 | 7 | 7 | - | 5 | Led's usually need current limiting resistors |
| 'Selecta': | - | - |
Enabled (Ch2) |
- | - | - |
Selecta can activate and deactivate models without touching them
|
|
'L' pad: (Lipo booster monitor) |
Yes | Yes | Yes | Yes | Yes | Yes |
Low voltage protection for a single cell lipo when used with a voltage booster |
| Size: | 12.3 x 21.5 x 4.0mm (0.5x0.9") | ||||||
| Weight: | 1.0g | ||||||
| Pad spacing: | 2.54mm (0.1") |
||||||
| Voltage range: | 3-16v | ||||||
|
Motor current: (as supplied) |
1.5A | 3.0-8.4v | <=16kHz 1.0A | 8.4-12.6 | <=250Hz Currents are with motor stalled at 100% throttle |
||||||
|
Motor current (with heatshink)  |
1.5A | up to 16v | <=250Hz Currents are with motor stalled at 100% throttle Add heatsink same size as Rx or larger (eg: 0.6 x 10 x 21mm) |
||||||
| Rx current: | 15mA | ||||||
| Rx outputs: | 9 (see above) | ||||||
| Tx channels*: | 14 max (9 tested) | ||||||
| Modulation: | 2.4GHz compatible with 22ms DSM2 and DSMX Air and 16.5ms DSM2 Surface |
||||||
| Range: | Indoor/Outdoor |
* = Channels that can be used to control receiver outputs (all outputs can be associated with any channel)
INSTRUCTIONS:
| Rx61-1 | Rx61-2 | Rx61-22 | Rx61-3 | Rx61-4 | Rx61-5 | Change | Version |
v6.0.3 |
v6.0.3 |
v6.0.3 |
v6.0.3 |
v6.0.3 |
v6.0.3 |
Adjustable Selecta delay, Directional lights, Infrared, Auto lipo booster, SumPPM |
PROGRAMMING:
| All receivers | Version |
v6.0.3 |