|
|
DT Receiver - Rx46 Details
|
|
|
|
DESCRIPTION:
Receiver for 1 Actuator + 1-2 brushed ESC's + 3 servos
Small pads, flexible PCB that must not be flexed, for advanced modellers
| Actuator outputs: | 1, 150ohm (MCU ports), 128 step |
| Servo outputs: | 3, 1024 step |
| Optional output: | 7ch Sum-PPM output on 1 pin |
| Brushed ESC's: | 2A, 64 step, 1-direction (planes), with steering mix Rx46-1 has 1 ESC Rx46-2 has 2 ESC |
| Size: | 8.8 x 9.3 x 2.2mm |
| Weight: | 0.15-0.16g |
| Pad spacing: | 1.2mm |
| Voltage: | 3-10v |
| Current: | 9mA (low current mode) |
| Modulation: | 2.4GHz compatible with 22ms DSM2 Air |
| Range: | Indoor |
INSTRUCTIONS:
v3.4.3