DT Receiver - Addon board


PRODUCT: ADD1 / ADD2

DESCRIPTION:
The addon board is used to boost the current rating of 'H' outputs on 'v5' receivers.
The addon board is used to convert two 'F' outputs to one 'H' output (2-direction).

SPECIFICATION:

Item

ADD1 ADD2
Current
800mA 3000mA
Size
1.2 x 4.4 x 9.0mm 1.2 x 6.3 x 12.5mm
Weight
0.06g 0.11g
Pad spacing
1.4mm 1.5mm
Voltage
3-6v 3-10v

CONNECTIONS:

Connections

Receiver Options

Rx43d-x-v5 OPTION 1:
ADD1 is used to increase any H output to 800mA capability.
ADD2 is used to increase any H output to 3A capability.
Connect ADD1/2 inputs to H1, H2 or H3 outputs (+/- also).
Rx41d-v5
Rx45-v5

Rx43d-x-v5 OPTION 2:
Converts two F outputs to one H output
F1 and F2 must be set to the 'muscle wire' settings (3-flash).
Connect ADD1/2 inputs to the 'control' pads driving the Fets on F outputs (+/- also).
Rx41d-v5
Rx45-v5

Rx43d-4-v5 OPTION 3:
Allows H4 to be used with motors and actuators
(H4 has 8mA outputs so has to be used with ADD1 or ADD2 to drive motors amd actuators)
Connect ADD1/2 inputs to H4 outputs (+/- also).


Home Videos About Buy Email