|
|
Rx41d-v5 Overview
|
|
|
PRODUCT: Rx41d-v5
PCB ID: 1d
DESCRIPTION:
Receiver for miniature trains, boats and cars driving motors, actuators, servos, leds and other items.
Standard setup + facility to change output types over radio link.
|
Variant: |
Rx41d-1 |
Rx41d-2 |
Rx41d-22 |
Rx41d-3 |
Details |
|
Purpose: |
Train with joystick Tx |
Train with Tx21 |
Train with Tx22 |
Car with joystick Tx |
|
|
'H' output: (H-Bridge) |
1 500mA |
1 500mA |
1 500mA |
1 500mA |
This output is a reversable ESC for brushed motors (cars, trains, boats) or actuator steering 128 step PWM control |
|
Motor control |
'Low off' | 'Center off' | 'Center off' | 'Center off' | |
|
Direction channel |
Yes |
- |
- |
- |
|
|
'F' outputs: (Fets) |
2 2A |
2 2A |
2 2A |
2 2A |
'F' outputs are non-reversable ESC's for brushed motors (planes) and variable voltage/on/off switching 2 can be used for steering with 2 motors (planes), 2 muscle wires (nitinol, flexinol) and 2-coil actuators 2 can be converted to a reversable H output with ADD1/2 1 can be used for a motor, led, horn, buzzer, etc. 64 step PWM control |
|
'P' outputs: (Pads) |
3 |
3 |
3 |
3 |
'P' outputs are signal pads for Servos and low current on/off switching (<8mA) Special programs for car indicators, brake, reverse, flasher, headlights and other switching 256 step Servos |
|
Selecta |
- | - |
Enabled |
- |
Up to 12 model can be associated with a Selecta switch on Tx22 or using any switched channel on a joystick transmitter Outputs 'hold' their settings when deselected |
| Size: | 10.1 x 10.8 x 2.2mm | ||||
| Weight: | 0.26g | ||||
| Pad spacing: | 1.27mm (0.05") | ||||
| Voltage: | 3-6v | ||||
| Current: | 13mA | ||||
| Modulation: | 2.4GHz compatible with: - DSM2 Air - v502/v503/v510/v511/v520 - DSMX - v520 - DSM2 Surface - v502/v503/v510/v511 |
||||
| Channels: | 7 max | ||||
| Range: | Indoor |
INSTRUCTIONS:
| Version | Marking | Rx41d-0 | Rx41d-1 | Rx41d-2 | Rx41d-3 | Rx41d-22 |
| 520-x | 20x | - |
v520 |
v520 |
v520 |
v520 |
| 510-x | 10x | - |
v510 |
v510 |
v510 |
v510 |
| 503-x | - |
v503 |
v503 |
v503 |
v503 |
- |
| 502-x | - |
v502 |
- | - | - | - |
PROGRAMMING:
Settings can be changed with a joystick transmitter or Prog3.
| Version | Marking | Options table |
| 520-x | 20x |
v520 |
| 510-x | 10x |
v510 |
| 503-x | - |
v503 |
| 502-x | - |
v502 |
PROG2/PROG3:
Prog3 is intended for most customers. Prog2 is intended for shops.
| Rx version | Prog2 | Prog3 |
| 510-x |
v110 |
v110 |
VIDEO EXAMPLE:
| Forward/reverse with 'full stick' throttle settings and separate 'direction' channel. |