v35x Beta Software


DT receivers with v35x software (eg: v353) are intended to be compatible with Spektrum DSM2 and DSMX. This software also attempts to allow up to 9 channels in some receivers. This software is considered "Beta" and is not proven or guaranteed.

If the v35x software does not bind or work correctly, customers can return receivers for the current stable software to be installed (v344-4). This only works with DSM2. Customers will normally be expected to pay postage both ways.


MICRO RECEIVERS FOR SERVOS:
* 2=DSM2, X=DSMX, S=3ch DSM2 Surface (DX3/DX4), P=18ch XPLUS


Click to
enlarge
Name Weight Size Connector/Pad spacing *DSM
versions
Brushed
ESC
(planes)
SumPPM
Serial
options
Channels Comment
Rx31
Rx31-K1
Rx31-Sum
0.21g
0.21g
0.21g
9.3 x
9.9mm
1.27mm (0.05") 2,X,S - Y
Y
Y
6
7
7
Rx31 has 6 servo outputs
Rx31-K1 has 7ch Serial output
Rx31-Sum has 7ch SumPPM/CPPM
Product page | Instructions (v3.4)
Rx31-F
0.23g 9.3 x
9.9mm
1.27mm (0.05") 2,X 1 - 5 Product page | Instructions (v3.4)
Physically the same as above but has FET installed for motor ESC
Rx31d-F 0.23g 9.8 x
10.2mm
1.27mm (0.05") 2,X 2 - 4 Product page | Instructions (v3.4.4)
Twin-steer
Rx32d
Rx32d-18S
0.28g 11.1 x
12.0mm
1.27mm (0.05") 2,X,S
2,X,P
-
-
Y
Y
9
18
Product page | Instructions v3.4 | v3.5
Rx32d-18S = 18ch Serial only (18ch X-Plus)
Serial/SumPPM options
Rx33 0.65g 13.3 x
15.7mm
1.0mm JST SH (IDC)
-Spektrum & Falcon servos
2,X 1 - 6
4 plugs
Instructions (v3.3)
Instructions (v3.4)
Rx34d 0.68g 11.7 x
16.5mm
1.25mm MOLEX PICOBLADE
-Futaba/Walkera/HobbyKing
2,X 2 - 6
4 plugs
Product page | Instructions (v3.4)
Twin-steer
Rx35d-N
Rx35d-V
Rx35d-V-7
0.35g
0.71g
0.71g
12.1 x
17.0mm
1.5mm JST ZH
-as used on Spektrum AR6300
2,X
2,X
2,X,S
2
2
-
-
-
Y
5(7)
5(7)
7
5 servo pads, 2 ESC's
4 servo sockets, 1 servo pad, 2 ESC's
4 servo sockets, 3 servo pads
Instructions (v3.4)
Rx36-N
Rx36-H
0.38g
1.30g
11.6 x
26.3mm
2.54mm Standard
-Horizontal or No connectors
2,X 1 - 6
4 plugs
Instructions (v3.3)
Instructions (v3.4)
Rx27-N
Rx27-H
0.7g
2.1g
14.5 x
29.0mm
2.54mm Standard
-Horizontal or No connectors
2,X,S - Y 6
5 plugs
Instructions (v2.6)
More range than Rx36 (> Parkfly)
Rx37
Rx37-F
0.31g
0.33g
14.1 x
15.0mm
Solder points on Rx for servo +/-
Designed for F3P
2,X
2,X
-
2
-
-
7
7
Product page | Instructions (v3.4.4)



MICRO RECEIVERS FOR ACTUATORS:
* 2=DSM2, X=DSMX


Click to
enlarge
Name Weight Size Pad spacing *DSM
versions
Actuator
outputs
Brushed
ESC
(planes)
Servo
outputs
Comment
Rx41d 0.28g 10.1 x
10.8mm
1.27mm (0.05") 2,X 1 2 3 Product page | Instructions (v3.4.4)
Twin-steer
Rx43d 0.35g 11.8 x
12.9mm
1.27mm (0.05") 2,X 3 2 4 Product page | Instructions (v3.4.4)
Twin-steer



Home News Videos About Buy Email